Rock Shield Color Enhancer

You are here: Home / Collections / Rock Shield / Rock Shield Color Enhancer

ROCK SHIELD SEALER & COLOR ENHANCER

For use on LIMESTONE, MARBLE, SANDSTONE, GRANITE, QUARTZ, CEMENT TILES, TERRACOTTA & CONCRETE. Rock Shield sealer is a high performing ecological sealant, which prevents staining from environmental elements, dirt and grime along with accidental spillages such as oil, grease, coffee, red wine, paint and much more. It is an environmentally friendly, non hazardous product that is safe to use around children, pets, plants and aquatic life. Exceptionally easy to apply.

NO VOC (Volatile Organic Compounds)
NO PBT (Persistent, Bioaccumulative & Toxic)

Usage: Commercial & Residential; Interior & Exterior applications.

Stock LA Warehouse.

AVAILABILITYSIZEMATERIALCOVERAGE / SF
StockQuartLimestone & Encaustic Cement Tile45 - 55 sq ft
StockGallonLimestone & Encaustic Cement Tile180 - 220 sq ft
Stock6.6 GallonLimestone & Encaustic Cement Tile1,188-1,452 sq ft
StockQuartConcrete Paving & Terracotta30 - 40 sq ft
StockGallonConcrete Paving & Terracotta120 - 160 sq ft
Stock6.6 GallonConcrete Paving & Terracotta792 - 1,056 sq ft
StockQuartGranite & Marble90 - 130 sq ft
StockGallonGranite & Marble360 - 520 sq ft
Stock6.6 GallonGranite & Marble2,376 - 3,432 sq ft
  • Keep away from children. Avoid contact with skin. Wear protective gloves & glasses.
  • For best results clean and seal once per year.
  • Do not use 4 hours before or 4 hours after rain.
  • Do not apply during rain or frost and when temperature is below 41°F or above 104°F.
  • Do not use on polished closed surfaces.

* Depending on weather, sealer can dry within hours.
* For best results clean and seal once per year.

NO VOC (Volatile Organic Compounds)
NO PBT (Persistent, Bioaccumulative & Toxic)

Stock Sizes: 1 Quart, 1 Gallon & 6.6 Gallon Drum
Usage:
 Commercial & Residential; Interior & Exterior applications.
Application Conditions/Limitations
Substrate & Ambient temperature: 41°F to 104°F
Substrate moisture: 5% maximum

HOW TO APPLY

ALWAYS TEST ON A SMALL AREA FIRST
Substrate Quality: Cracks must be repaired using a mortar or jointing repair system.
Moisture content should be less than 5% to a depth of 1 cm.
Substrate Preparation: Remove and clean any dust, dirt, oil, efflorescence, organic growth and old paint.

1. Ensure Surface Is Clean, Dry & Dust Free.

2. Shake Well Before Use, Apply Using A Low Pressure Sprayer, Roller Or Brush.

3. Apply Sealer Until Surface Is Saturated. Distribute Evenly To Prevent Pooling.

4. Remove Excess Product After 30 Mins. Allow 24 Hours To Dry.

Apply second coat while wet; within 10 minutes of first coat. Don’t allow product to dry between coats. Once surface is dry, sealer cannot be re-applied. Water repellency may take 7 days to reach 100% effectiveness.

* Depending on weather, sealer can dry within hours.
* For best results clean and seal once per year.

Please inspect ALL material upon receipt. Claims will not be honored after installation. Rock Mill considers the actions of the installer/contractor/3rd party that customer authorizes to pick up the material to be the responsibility of the customer.

Rock Mill will not honor claims made by the customer, due to unauthorized or improper installation by customer’s installer/contractor. Please ensure that a sufficient quantity of stone is initially ordered to complete the job.

Add-on orders purchased later may vary slightly as new batches may come from different parts of the quarry and will not be guaranteed to match the original order.

All items that are stocked are located at the Rock Mill Gardena, California warehouse.

For more information, please contact your Rock Mill rep or visit our website. Thank you!

Untreated Surfaces
Spills penetrate deep into the pores of an untreated surface leaving hard to remove or permanent staining.

Treated Surfaces
Sealing the surface creates a breathable moisture repellent shield that prevents spills and environmental weathering sinking deep into the surface.

HOW TO APPLY

ALWAYS TEST ON A SMALL AREA FIRST
Substrate Quality: Cracks must be repaired using a mortar or jointing repair system.
Moisture content should be less than 5% to a depth of 1 cm.
Substrate Preparation: Remove and clean any dust, dirt, oil, efflorescence, organic growth and old paint.

Apply second coat while wet; within 10 minutes of first coat. Don’t allow product to dry between coats. Once surface is dry, sealer cannot be re-applied. Water repellency may take 7 days to reach 100% effectiveness.