Macchia Vecchia is part of the Italian Porcelain large format slabs collection made of thin slabs that replicate the beauty of natural stone: Marble, Onyx, Quartzite, and Terrazzo. These slabs are durable and versatile.
Usage: Commercial & residential, interior, exterior, vertical, horizontal & water applications.
Pictures shown are representations ONLY. Sizes are approximate & may vary slightly with each order. Stock LA Warehouse.
INSTALLATION IMAGES BELOW↓
|Slab||Polished||63-1/2" x 127-1/8"||12 mm||Stock|
- Exterior Cladding:
- Exterior Pavers:
- Interior Walls: Yes
- Interior Floors: Yes
- Kitchen Countertops: Yes
- Other Countertops: Yes
- Wet Areas:
- Traffic: Commercial & Residential
***ALWAYS USE A LICENSED INSTALLER ***
FLOOR PROTECTION & CLEANING PROCEDURES
If other construction occurs onsite, protect the entire floor with thick paper, cardboard, or plastic until all construction is finished. Be careful with tape, including painter’s blue tape on the surface because it may leave a sticky residue when removed.
For further installation instructions, please refer to the Tile Council of North America.
Please inspect ALL material upon receipt. Claims will not be honored after installation. Rock Mill considers the actions of the installer/contractor/3rd party that customer authorizes to pick up the material to be the responsibility of the customer.
Rock Mill will not honor claims made by the customer, due to unauthorized or improper installation by customer’s installer/contractor. Please ensure that a sufficient quantity of stone is initially ordered to complete the job.
Add-on orders purchased later may vary slightly as new batches may come from different parts of the quarry and will not be guaranteed to match the original order.
All items that are stocked are located at the Rock Mill Gardena, California warehouse.
For more information, please contact your Rock Mill rep. Thank you!
Thickness: ± 0.5% / ± 0.5 mm
Flatness: ± 0.5% / ± 2.0 mm
Stain Resistance: 5
Breaking Strength: ≥1,300 N / 250lbs
Flexural Strength: >35 MPa
Modulus of Rupture: ≥35 N/mm²
Impact Resistance: 0.85
Linear Thermal-expansion: ≤9x10-6 °C-1
Apparent Density: 2,500 Kg/m³
Deep Abrasion: 24-27 mm
Water Absorption: ≤0.1%
Frost Resistance: No change in bending strength after thermal cycle